AF-5G23-S45 also has a slant 45 Antenna like Airfiber models, although, there are variations in frequency bands etc., the AF-5G23-S45 antennas feature significant advances in noise isolation and beam performance to complement the airFiber X radios for carrier backhauls and Point-to-Point (PtP) bridging. Though the frequency is the same when compared to AF-5G30-S45 and AF-5G34-S45, the gain is less.
The AF-5G23-S45 antenna utilizes the 5 GHz frequency band. An AF-5G23-S45 antenna with an airFiber radio can be made as endpoints in a backhaul link to deliver good bandwidth from a WISP network out to a neighbouring tower. Installation requires just a 5 GHz airFiber X radio (sold separately) and a 13 mm wrench. Mounting point should be at least 1 m below the highest point on the structure and for tower installations, at least 3 m below the top of the tower. A set of airFiber -5G30-S45 antenna with an airFiber radio is able create the endpoint of a high-performance, Point-to-Point (PtP) bridge.The package content includes Dish Antenna, Mounting Bracket, Antenna Feed, Lower Pole Bracket, Upper Pole Bracket, Support Arm, Brace Screws (M6, Qty. 4), Protective Shroud, Hex Head Bolts (M8, Qty. 5), Lock Washers (M8, Qty. 5), Flat Washers (M8, Qty. 5), Stabilizer Brackets (Qty. 2) 5 GHz, 30 dBi Slant 45 Antenna for airFiber Model: AF-5G23-S45.
Later an airMAX Sector antenna with a Rocket radio delivers bandwidth to the WISP’s customers. The best carrier construction having a dish reflector design for excellent beam directivity, the AF-3G26-S45 antennas feature robust mechanical design using industrial-strength hardware for outdoor application use. Every AF-5G23-S45 antenna has a built-in airFiber radio mount, so installation requires no special tools. Snap the airFiber radio securely into place and mount the antenna; you then have the optimal combination of AF-5G23-S45 antenna and airFiber radio for your PtP application.