PBE-5AC-300 WIRELESS BRIDGE,OUTDOOR 5GHz 22DBI

$0.00
Ex Tax: $0.00
Product Code: PBE-5AC-300
Stock Instock

Overview

Model PBE-5AC-300 from UBIQUITI networks is the Power Beam ac model one must look for. PBE-5AC-300 will definitely satisfy the needs of the customers requiring a Power Beam ac. The packa...

Model PBE-5AC-300 from UBIQUITI networks is the Power Beam ac model one must look for. PBE-5AC-300 will definitely satisfy the needs of the customers requiring a Power Beam ac. The package of Power Beam ac, model PBE-5AC-300 consists of:

  • 1. Dish Reflector.
  • 2. Antenna feed.
  • 3. Rear Housing.
  • 4. Dish Bracket.
  • 5. Pole Clamp.
  • 6. U- bolt.
  • 7. Flange nuts (M6, 2 pieces).
  • 8. Washers (M6, 2 pieces).
  • 9. Mounting Bracket with Gigabit PoE (24 V, o.5 A).
  • 10. Power Cord.

Directional outdoor coverage is provided by the Power Beam model, PBE-5AC-300, mounted outdoors with the installation of Dish Reflector. If the Dish Reflector is not installed, an outdoor to indoor coverage will be provided with the help of 3 dBi Antenna feed only.

For the installation of PBE-5AC-300, the tabs of the Dish Bracket should be aligned and inserted into the slots of the Dish Reflector. The Dish Bracket should be rotated anti-clockwise till the tabs are locked in place. The Alignment pins of the rear housing should be lined up with the alignment holes of the Dish Bracket. The pins should be pushed and inserted till they lock into place. The sides of the Cable door must be pushed in and then detached from the Rear Housing. Further, attach the antenna field and then connect the Ethernet cable. The U-bolt should be inserted into the Dish Bracket and Pole Clamp. The Ethernet Cable from the Power Beam Ethernet port should be connected to the POE port of the Gigabit PoE adapter. An Ethernet cable from the LAN should be connected to the adapter's LAN port. The Power cord should be connected to the adapter's power port. The other end of the Power cord should be connected to a power outlet. Thus, the installation of PBE-5AC-300 is completed. The Mounting of PoE Adapter is optional.





Write a review

Note: HTML is not translated!

Rating Bad           Good
Continue