BM2HP is a Bullet series presented by the Ubiquiti networks and is a high-powered outdoor radio with a cylindrical bullet shaped and so is the name. Out of the many Ubiquiti bullet series, Bullet M is the most popular version. BM2HP is a wireless radio antenna, which is well equipped with an integrated Type N RF connector and it can be very easily connected to an antenna. As a result of this design, a powerful outdoor access point or a client or even a bridge can be created. BM2HP also features a weatherproof gasket and combined with the integrated N-Connector makes it easy for the purpose of installation.
Though BM2HP is not equipped with the PoE injector and a power supply and they are to be purchased separately, its working conditions don’t make it any less important. The enhanced receiver design of BM2HP makes the bullet ideal for long-distance links and can speed over multi-km distances. With the installation of BM2HP, there is no need for any external RF cables or any special antenna. It uses passive method over Ethernet and hence ideal for pairs 4, 5+; 7,8 returns. The recommended voltage range to adapt it would be around 10V to 24V.
Hence, while purchasing a BM2HP, it is advised to buy a power injector and to it add an antenna. Once done with this process, the hardware is all ready for the use. It is important to note that the network interface must be strictly an Ethernet interface. Any kind of sector antennas, Omni antennas, Dish antennas, and any other types of antennas can easily be molded or made use as a powerful and a robust outdoor access point, client or bridge as mentioned above. All the work to be done is simple plugging in of Bullet M2HP.